There are many types of loose materials that are sold in cubic yards, or “yards,” because that short. Topsoil, mulch, and also gravel are just a few of the frequently used commodities that are marketed by this volume metric.

You are watching: How many tons can a dump truck carry


It isn’t just landscapers and also contractors who require to have knowledge of cubic yards. If you’re going come transport any kind of of the materials mentioned over in a dump truck, because that example, it’s essential to know exactly how much the truck can carry. In the following guide, we’ll discuss how you identify a dump truck’s capacity in cubic yards.

Dump truck Cubic Yardage - The Basics

While over there is room for variance, many full-size intake trucks have a capacity of between 10 and 16 cubic yards. These types of vehicles frequently have your capacity listed in the owner’s manual.

Smaller intake trucks, frequently those mounted on a pickup frame, will have actually comparably much less capacity, sometimes as little as 1 ½ cubic yards.

If you can’t uncover your recording truck’s volume in the owner’s manual, don’t worry. It’s fairly simple to determine using a ice measure and also a calculator.

Measure the width the the van bed, indigenous the within of one wall surface to the other. Write down this number in feet to do the calculations simpler. For this reason let’s say your truck bed is 63 inches wide, you would certainly write it under as 5.25 feet.Measure the length the the bed in the same fashion and paper the figure in feet.Measure the height of the bed, starting from the bottom and extending to the peak of the tailgate or the sides (whichever is lower).At this point, friend should have actually three figures noted for the width, length, and also height of her bed. Multiply them every together to determine the capacity. Because that a van bed that’s 14 feet long, 6 feet wide, and also 5 feet high, you would calculate 14 x 6 x 5 = 420. This number is the volume of your truck bed in cubic feet.There are 27 cubic feet in a cubic yard, for this reason to find your cubic yardage, you should divide the vault number by 27. Using the example over for our 420 cubic foot truck, we would certainly calculate 420 ÷ 27 = 15.56 cubic yards.

Dump Truck capacity - an ext Than simply Yardage

A cubic garden represents a block of material that steps three feet on each side. In theory, the material itself have the right to be anything, from water to rock to mulch. For this reason, yardage alone is one imperfect measurement of a intake truck’s all at once capacity. Perhaps much more important is the truck’s weight rating.

The load rating will count on a range of factors, including the truck’s chassis and suspension. Smaller sized dump van on pickup frames deserve to have a weight limit together low as fifty percent a ton, whereas bigger dump van can bring as much as 15 loads (30,000 pounds) the material. That’s quite the large range!

When hauling many materials, the weight of your load will be the limiting factor. Because that example, sand can weigh upwards that 3,000 pounds every cubic yard, meaning that in a massive, 30,000-pound intake truck, girlfriend could bring a preferably of 10 cubic yards. In a dump van on a half-ton pickup frame, you could only bring a third of a yard of sand.

Mulch, in particular, have the right to be an overwhelming to account for, largely because it depends on just how wet it is. Dry mulch can weigh as tiny as 700 pounds every yard, vice versa, wet, compost-like mulch deserve to tip the scale at 1,500 pounds per yard.

See more: How To Say Water In Hawaiian Word Of The Day: 'Omole Wai


Larger recording trucks have the right to carry approximately 10 come 16 cubic yards the material. However, the full volume is not typically the limiting factor. In most cases, the vehicle’s weight limit will certainly determine exactly how much product you are eventually able to safely transport.